Polaris P70 Robotic Pool Cleaner Review (2026): Floor and Cove Cleaning for Above-Ground Pools
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Polaris P70 is a compact robotic pool cleaner made for above-ground pools and simple in-ground pools. It cleans and scrubs the floor and the cove where floor meets wall, using cyclonic suction that Polaris says does not fade as the canister fills, and finishes a cycle in as little as 2 hours. The transparent lid shows when the filter canister needs emptying, and the canister comes out, unlatches and rinses with a hose. Our verdict: a tidy, low-fuss choice for above-ground owners who mostly fight debris on the floor; if you want wall cleaning or a stated pool length, look elsewhere. This review is built on Polaris's listing and published specs, not on our own pool time.
What stands out
- Floor and cove cleaning with scrubbing
- Cyclonic vacuum that holds suction
- Transparent lid shows when to empty
- Filter canister: remove, shake, spray
- Cycle in as little as 2 hours
Who it fits
Good fit for
Above-ground pool owners, or owners of simple flat in-ground pools, who want the floor kept clean with minimal filter fuss.
Who should skip it
Skip it if your walls or waterline need cleaning, or if you want app control, a timer or a stated maximum pool size.
Verdict: A simple floor-and-cove robot with a clever see-through canister.
P70 specs explained
Floor and cove
It scrubs the pool floor and the curved cove; walls are not mentioned.
Cyclonic vacuum
Keeps suction steady as debris collects in the canister.
Easy-clean canister
Remove, unlatch, shake out and hose down.
Transparent lid
You can see when it is full without opening it.
2-hour cycle
Polaris's shortest stated cleaning time for floor and cove.
Size and missing details
The spec fields give 15 x 9.98 x 12 inches and 22 pounds in white; Polaris calls it compact and lightweight, so the weight figure may include packaging. The listing does not state the cable length, power supply details or a maximum pool size, so check those against your pool before ordering.
A cleaning day with the P70
Drop it in, start a cycle and let it work the floor and cove for about two hours, then lift it out and empty the canister when the clear lid shows debris. Brush the walls and waterline yourself every so often, since the P70 does not climb.
Polaris P70 or Dolphin Nautilus AG
Choose the Polaris P70 if floor debris is your main job and you like checking the canister at a glance. Choose the Dolphin Nautilus AG if you want a rated size and faster cycles: it is listed for above-ground pools up to 33 ft, with an active scrubbing brush, top-load filters and a 1.5-hour cycle.
Check before you buy
- Above-ground or flat in-ground pool
- Walls brushed by hand
- Cable length confirmed
- Outlet with GFCI near the pool
The product at a glance
Polaris Above Ground Robotic Pool Cleaner
Best for: Above-ground pool floors
- Cleaning Coverage
- Floor, cove
- Pool Type
- Above-ground, simple in-ground
- Ideal For
- Above-Ground Pools
- Dimensions
- 15 × 9.98 × 12 inches
- Weight
- 22 pounds
View on Amazon: Polaris Above Ground Robotic Pool Cleaner Affiliate link
The Polaris P70 is a compact robotic cleaner for above-ground and simple in-ground pools that scrubs the floor and cove with cyclonic suction, behind a see-through canister lid.
Pros
- Easy see-through canister
- Steady cyclonic suction
- Short 2-hour cycle
Cons
- No wall or waterline cleaning
- No pool size or cable length stated
- No app or timer
Good fit if
- You own an above-ground pool
- You want simple filter care
Skip if
- You need wall cleaning
- You want app control
Verdict: An easy floor robot for above-ground pools.
Specifications side by side
| Spec | Polaris Above Ground Robotic Pool Cleaner |
|---|---|
| Cleaning Coverage | Floor, cove |
| Pool Type | Above-ground, simple in-ground |
| Ideal For | Above-Ground Pools |
| Dimensions | 15 × 9.98 × 12 inches |
| Weight | 22 pounds |
| Size | P70 |
| Color | White |
| Model | F70 |
Frequently asked questions
Does the Polaris P70 climb walls?
No, the listing says it cleans the floor and cove only.
How long does a P70 cycle take?
As little as 2 hours.
Can the P70 go in an in-ground pool?
Polaris says it also suits simple in-ground pools.
How do you clean the P70 filter?
Remove the canister, unlatch it, shake out debris and spray it with a hose.
