Chasing Hydro 4 Cordless Pool Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This chasing hydro 4 cordless pool review covers the Chasing Hydro 4, a robot cleaner for inground pools. It features a floating battery design that detaches for easy charging. The unit offers 210 minutes of runtime per charge. It also delivers 5070 GPH suction power. These two specs define its cleaning capability. The robot navigates floors, walls, and waterlines. It uses a dedicated app for control. You can select different cleaning modes. The device aims for over 95% coverage. This guide explains how these specs work together.
What stands out
- 210-minute battery runtime with a floating, detachable battery for easy charging
- 5070 GPH suction power with active scrubbing silicone brushes
- 4.1L dual-chamber filter basket for high debris capacity
- App control via Poolmate Bot for scheduling and mode selection
Who it fits
Good fit for
This robot suits owners of inground pools who want thorough cleaning without managing cords. The 210-minute runtime handles large areas in one go. The 5070 GPH suction tackles heavy debris and fine silt effectively. The 4.1L filter basket reduces how often you must empty it. App control lets you schedule cleanings remotely. If you need a set-and-forget solution for floor, wall, and waterline cleaning, this model fits your needs.
Who should skip it
Skip this model if you have a small above-ground pool. The data specifies it is for inground pools only. You might also look elsewhere if you prefer manual remote control. This unit relies on the Poolmate Bot App for operation. There is no mention of a physical remote. If you want a smaller footprint, note the 14.3-pound weight. The floating battery system may not suit those who dislike detachable components.
Verdict: The Chasing Hydro 4 offers strong suction and long runtime for inground pools. Its app control and large filter basket make maintenance convenient.
Key specs for pool cleaning
Battery Runtime: 210 minutes
You get three and a half hours of continuous cleaning on a single charge. This duration allows the unit to cover large inground pools without needing a mid-cycle recharge. You can plan your maintenance schedule around this window. Compare this runtime to corded models that offer unlimited operation but require outlet access. The floating battery design also simplifies charging by removing the need to handle heavy submersible units.
Suction Power: 5070 GPH
The dual turbine pumps move over five thousand gallons of water per hour. This high flow rate helps lift heavy debris like leaves and sand from the pool floor. You benefit from faster cleaning cycles and effective removal of stubborn dirt. When comparing robot vacuums and mops, look for similar suction metrics to ensure the unit can handle varied debris loads. Higher GPH generally correlates with better scrubbing performance on textured surfaces.
Debris Capacity: 4.1 L
The dual-chamber filter basket holds 4.1 liters of captured material. This volume accommodates significant amounts of dirt, silt, and organic matter before you need to empty it. You can clean larger areas without frequent interruptions to rinse the filters. Compare this capacity to smaller units that require emptying after every session. The large basket reduces maintenance time, allowing you to focus on other tasks while the robot works.
Control Method: Poolmate Bot App
You manage the cleaner remotely via Bluetooth or cloud connectivity using the dedicated app. This feature lets you schedule cleanings, select specific modes, and monitor status without being near the pool. You gain convenience by adjusting settings from your phone. Compare this to manual remotes that require line-of-sight. App control offers greater flexibility for inground pools where the unit is submerged and out of immediate reach.
Design and Build of the Chasing Hydro 4
The Chasing Hydro 4 presents a compact, functional form factor for inground pools. According to the listing, the unit measures 13.8 inches in width, 18.1 inches in length, and 24.8 inches in height. It weighs 14.3 pounds. These dimensions allow the robot to navigate standard pool lanes and corners without getting stuck. The dark grey finish blends into typical pool environments, keeping the visual profile low when the device is floating or submerged.
Power management is handled by a separate floating battery unit. This design choice means you do not need to lift the heavy 14.3-pound robot out of the water to charge it. You simply detach the buoy, which connects to the charger. The robot itself contains the cleaning mechanisms, including dual turbine pumps and silicone brushes. This separation of power and cleaning components simplifies maintenance and reduces the physical effort required for routine care.
Control is managed via the Poolmate Bot App. You select cleaning modes and schedules through Bluetooth or cloud connectivity. The interface allows you to choose between floor-only, wall-enhanced, or full coverage modes. The layout of the controls is digital, removing the need for a physical remote. This app-centric approach keeps the robot’s body streamlined and waterproof, ensuring that buttons or dials do not compromise the seal during operation.
Setup and everyday use guide
Setting up the Chasing Hydro 4 is straightforward due to its cordless floating battery design. You detach the lightweight buoy from the main unit for charging. The battery requires four hours to fully charge. Once charged, you attach it back to the robot. The unit connects via Bluetooth or cloud service using the Poolmate Bot App. You do not need to handle heavy equipment during setup. The floating battery design simplifies storage and charging routines significantly.
Daily operation involves placing the robot in your inground pool. You select your preferred cleaning mode through the app or the unit itself. There are three modes: Auto for floor, wall, and waterline cleaning; Wall Enhanced; and Floor Only. You can choose between one-hour, two-hour, or three-hour cycles. The three-hour Ultra cycle allows for extended cleaning sessions. The robot navigates autonomously, climbing walls and crossing main drains. It parks at the edge after completing its task.
Maintenance is equally simple. The 4.1-liter dual-chamber filter basket captures debris ranging from leaves to fine silt. Both the top and bottom lids open fully for easy disposal. You rinse the filter and reassemble it. The app lets you schedule cleanings in advance. This remote control feature means you can monitor status and adjust settings without being near the pool. The system is designed for minimal manual intervention while ensuring thorough coverage of your pool surfaces.
Check Pool Fit And App Needs
Before purchasing the Chasing Hydro 4, verify your pool dimensions against its 95% coverage claim. The unit is designed for inground pools, so confirm your surface type matches this requirement. You should check if your existing Poolmate Bot App infrastructure integrates smoothly with this specific model, as control relies entirely on Bluetooth or cloud connectivity via the app. Consider the 4.1-liter filter basket capacity; if you have heavy leaf debris, you may need to empty it mid-cycle to maintain optimal suction. The floating battery design simplifies charging, but ensure you have adequate deck space for the buoy and charger. This robot sits alongside other cordless options by offering extended 210-minute runtime. However, you must weigh this against the need for manual debris disposal and the absence of a physical remote. It suits users who prioritize app-based scheduling and wall climbing over hands-free convenience.
Check before you buy
- Confirm your pool is inground and compatible with wall climbing robots.
- Ensure you have reliable Bluetooth or cloud access for app control.
- Verify deck space exists for the floating battery and charger unit.
- Check if the 4.1L filter basket handles your typical debris volume.
The product at a glance
Chasing Hydro 4 Cordless Pool Robot
Best for: Inground pools needing wall and waterline cleaning
- Cleaning Coverage
- Floor, wall, waterline
- Pool Type
- Inground pools
- Battery Runtime
- 210 minutes
- Suction Power
- 5070 GPH
- Power Source
- Cordless floating battery
- Debris Capacity
- 4.1 L
View on Amazon: Chasing Hydro 4 Cordless Pool Robot Affiliate link
The Chasing Hydro 4 is a cordless robotic cleaner for inground pools. It features a floating battery offering 210 minutes of runtime and 5070 GPH suction power. The unit cleans floors, walls, and waterlines with 95%+ coverage. You can control it via the Poolmate Bot App or manual modes. The 4.1L filter basket handles heavy debris. This model suits owners seeking thorough, automated maintenance for their pools.
Pros
- 210-minute battery runtime with floating design
- 5070 GPH suction with active scrubbing brushes
- Cleans floor, wall, and waterline with 95%+ coverage
- App control via Poolmate Bot for scheduling and mode selection
Cons
- Requires 4-hour charging time for full battery
- Limited to inground pools only
- 1-year warranty coverage
Good fit if
- You want automated cleaning for floors, walls, and waterlines
- You prefer app-based scheduling and remote control
- You have an inground pool with heavy debris
Skip if
- You have an above-ground pool
- You need faster charging than 4 hours
- You require longer than 1-year warranty coverage
Verdict: Chasing Hydro 4 Cordless Pool Vacuum delivers strong suction and comprehensive coverage for inground pools. It fits buyers who value app control and thorough wall cleaning.
Specifications side by side
| Spec | Chasing Hydro 4 Cordless Pool Robot |
|---|---|
| Cleaning Coverage | Floor, wall, waterline |
| Pool Type | Inground pools |
| Battery Runtime | 210 minutes |
| Suction Power | 5070 GPH |
| Power Source | Cordless floating battery |
| Debris Capacity | 4.1 L |
| Control Method | Poolmate Bot App |
| Special Features | Waterline Cleaning |
| Ideal For | In-Ground Pools |
| Dimensions | 18.1 × 13.8 × 24.8 inches |
| Weight | 14.3 pounds |
| Color | Dark Grey |
| Model | 40.40.300.0003 |
Frequently asked questions
Is the Chasing Hydro 4 suitable for wall and waterline cleaning?
Yes, it is designed for inground pools needing wall and waterline cleaning. The unit features specific waterline cleaning capabilities. This allows it to scrub the upper edges of your pool walls. You get comprehensive coverage that targets areas often missed by standard cleaners.
How much suction power does the Chasing Hydro 4 deliver?
The Chasing Hydro 4 delivers 5070 GPH of suction power. This high flow rate helps lift debris from the pool floor. Strong suction ensures effective cleaning of dirt and leaves. You benefit from a robust cleaning performance that handles common pool debris efficiently.
Can I control the Chasing Hydro 4 via a smartphone app?
Yes, you can control it using App Control. The unit connects to the Poolmate Bot App. This allows you to manage cleaning schedules remotely. You can start or stop cycles from your phone. This feature adds convenience for managing your pool maintenance routine.
What are the physical dimensions of the Chasing Hydro 4 robot?
The unit measures 13.8 inches in width, 18.1 inches in length, and 24.8 inches in height. It weighs 14.3 pounds. These dimensions fit standard inground pools. The compact design ensures it navigates pool spaces effectively without getting stuck.
Does the Chasing Hydro 4 use a corded or cordless design?
It uses a cordless power source. The battery is designed to float and detach for charging. This eliminates tangled cords in your pool. You get 210 minutes of runtime per charge. The floating design also aids in easy retrieval and maintenance.
Is the Chasing Hydro 4 compatible with above-ground pools?
No, it is ideal for in-ground pools only. The product data specifies it is designed for inground surfaces. You should verify your pool type before purchase. Using it in above-ground pools may not provide optimal performance or fit.