Beatbot Robotic Pool Cleaners: 8 Picks Ranked by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing the right beatbot robotic pool cleaner depends on your pool layout and whether you need surface skimming or multi-surface cleaning. Beatbot offers cordless pool vacuums and solar-powered skimmers across various dimensions, with weights ranging from under 17 pounds up to 27 pounds.
The Beatbot Sora 10 Cordless Pool Vacuum leads the lineup because its 6,800 GPH suction and 300-minute runtime make it best for large pools with shallow ledges and shelves. This guide compares 8 models based strictly on the specifications published on their listings.
Quick picks
Our 8 picks
Beatbot Sora 10 Cordless Pool Vacuum
Best for: large pools with shallow ledges and shelves
- Cleaning Coverage
- Floor, walls, waterline, shallow area
- Pool Type
- Above-ground and in-ground
- Battery Runtime
- Up to 300 minutes
- Suction Power
- 6800 GPH
- Power Source
- Cordless (7,800mAh battery)
- Debris Capacity
- 5L
The Beatbot Sora 10 is a cordless robotic pool cleaner designed for in-ground and above-ground pools up to 3,229 square feet. It delivers 6,800 GPH suction power and runs up to 300 minutes on a 7,800mAh battery. Dual front roller brushes scrub floors, walls, and waterlines, while the system cleans shallow areas down to 12 inches. It suits you if you need long runtime and multi-zone pool coverage.
Pros
- 6,800 GPH suction power with dual front scrubbing rollers
- Up to 300 minutes of floor runtime from a 7,800mAh battery
- Cleans floors, walls, waterlines, and shallow ledges down to 12 inches
- Large 5-liter debris basket with 150-micrometer filtration
Cons
- Ultra-fine 3-micrometer filter is sold separately
- Weighs 18.74 pounds before taking on water
Good fit if
- You have a pool up to 3,229 square feet requiring long single-charge runtime.
- You need a cleaner that reaches shallow sun shelves down to 12 inches deep.
- You want automatic waterline parking to make pulling the robot out simple.
Skip if
- You require ultra-fine particle filtration included in the standard package.
- You prefer a lighter cleaner under 15 pounds for easier lifting.
Verdict: Beatbot Sora 10 Cordless Pool Cleaner provides heavy-duty 6,800 GPH suction and up to 300 minutes of runtime across floors, walls, and shallow zones. It is a capable choice for large pool installations requiring extended multi-surface cleaning.
Beatbot Sora Cordless Pool Cleaner
Best for: Large pools needing surface and floor coverage
- Cleaning Coverage
- Surface, waterline, floor, walls
- Battery Runtime
- Up to 5 hours
- Suction Power
- 6,800 GPH
- Power Source
- 10,000 mAh battery
- Navigation Type
- AI navigation
- Control Method
- Beatbot app
The Beatbot Sora 70 Cordless Pool Cleaner handles your entire pool, covering the water surface, waterline, walls, floor, and shallow sections down to 8 inches. Its 10,000 mAh battery delivers up to 5 hours of floor run time and handles pools up to 3,200 square feet. With a 6,800 GPH suction rate and app retrieval, it fits large pools where you need automated surface and floor debris removal.
Pros
- 10,000 mAh battery delivers up to 5 hours of floor runtime
- Cleans surfaces, waterlines, walls, floors, and shallow zones down to 8 inches
- HydroBalance Structure generates 6,800 GPH suction rate
- JetPulse dual-jet system directs floating surface debris to the inlet
Cons
- Dry weight is heavy at 22.93 pounds
- Cannot navigate water shallower than 8 inches
Good fit if
- You have a large pool up to 3,200 square feet.
- You want simultaneous water surface skimming and floor cleaning in one robot.
- You prefer calling the robot to the edge using a mobile app.
Skip if
- You have shallow tanning ledges with less than 8 inches of water depth.
- You need a lightweight unit under 20 pounds.
Verdict: Beatbot Sora 70 Cordless Pool Cleaner pairs a 6,800 GPH suction rate with surface-to-floor cleaning for pools up to 3,200 square feet. Its 5-hour runtime suits large basins, though its 22.93-pound frame requires solid lifting effort.
Beatbot iSkim Solar Pool Skimmer
Best for: large pools with heavy floating leaf debris
- Battery Runtime
- Up to 28 hours
- Power Source
- 24W solar panel, rechargeable battery
- Debris Capacity
- 9 L
- Navigation Type
- SonicSense dual-ultrasonic
- Control Method
- Smartphone app
- Dimensions
- 5.91 × 3.94 × 4.72 inches
The Beatbot iSkim is a dedicated solar-powered pool skimmer designed to collect surface debris before it sinks. It features a 10.6-inch intake, a 550 μm fine-mesh filter, and an extra-large 9L basket with an anti-spill baffle. Powered by a 24W solar panel and an internal battery delivering up to 28 hours without sun, it suits you if you want automated, continuous surface skimming with app-based controls.
Pros
- Extra-large 9L debris basket with an anti-spill baffle
- 24W solar panel with up to 28 hours of runtime without sunlight
- 10.6-inch wide intake paired with a 550 μm fine-mesh filter
- SonicSense dual-ultrasonic obstacle detection and retractable anti-stranding legs
Cons
- Cleans pool surfaces only and does not scrub floors or walls
- Base package does not include a plug-in charger
Good fit if
- You need continuous surface skimming for heavy leaf fall.
- You have shallow steps or sun shelves where standard cleaners get stranded.
- You want mobile app controls to schedule runs and summon the robot to the edge.
Skip if
- You need a robotic cleaner that scrubs pool floors and walls.
- You want a standard plug-in wall charger included in the base package.
Verdict: Beatbot iSkim Solar Pool Skimmer delivers continuous surface cleaning backed by solar charging, ultrasonic sensors, and an expansive 9L debris capacity. It keeps surface debris from sinking while leaving floor and wall scrubbing to dedicated vacuum units.
Beatbot Sora 30 Cordless Pool Cleaner
Best for: in-ground pools with shallow tanning ledges
- Cleaning Coverage
- Floor, shallow areas, platforms
- Pool Type
- Above & in-ground pools
- Battery Runtime
- Up to 5 hours
- Suction Power
- 6800 GPH
- Power Source
- 10,000 mAh battery
- Debris Capacity
- 5 L
The Beatbot Sora 30 is a cordless robotic pool cleaner engineered for in-ground pools up to 3,229 square feet. It pairs 6,800 GPH suction with a 10,000 mAh battery that yields up to 5 hours of floor cleaning. Ultrasonic sensors allow it to navigate shallow platforms down to 8 inches deep. When finished, it surfaces at the edge for retrieval, making it practical if your pool features shallow ledges.
Pros
- Up to 5 hours of runtime from a 10,000 mAh battery
- High 6,800 GPH suction rate captures heavy debris
- Cleans shallow ledges and platforms down to 8 inches
- 5L debris capacity with 150 µm filtration
- Smart water-surface parking when battery drops below 12%
Cons
- App control relies on Bluetooth within a 20-meter range without Wi-Fi
- 150 µm filter mesh does not capture ultra-fine silt
- Listed specifically for in-ground pools rather than above-ground setups
Good fit if
- You have an in-ground pool up to 3,229 square feet with shallow ledges.
- You want long battery life offering up to 5 hours of floor cleaning.
- You want automatic edge parking and floating surface retrieval.
Skip if
- You need a filtration rating finer than 150 micrometers for ultra-fine dust.
- You require long-range Wi-Fi control rather than Bluetooth.
Verdict: Beatbot Sora 30 Cordless Pool Robot delivers strong endurance and cleaning power with a 5-hour runtime and 6,800 GPH suction. Its ultrasonic navigation makes it especially reliable for in-ground pools with sun shelves and shallow platforms.
Beatbot AquaSense 2 Cordless Pool Vacuum
Best for: in-ground pools needing automated surface retrieval
- Cleaning Coverage
- Floor, walls & waterline
- Pool Type
- Above & in-ground pools
- Power Source
- Cordless battery
- Navigation Type
- Intelligent path optimization
- Control Method
- App
- Dimensions
- 18 × 17 × 9 inches
The Beatbot AquaSense 2 is a cordless robotic pool cleaner built for in-ground pools. It measures 18 inches long, 17 inches wide, and 9 inches tall, weighing 26.46 pounds. The cleaner features automatic surface parking upon low battery or cycle completion, accompanied by SmartDrain water release for easier removal. An accompanying app enables one-click surface recall, making this unit a solid choice if you need a cable-free cleaning system with automated retrieval.
Pros
- Cordless design eliminates tangled power cables
- Auto surface parking activates after cleaning or on low battery
- SmartDrain technology releases water for easier lifting
- One-click app parking calls the cleaner to the surface
Cons
- Dry weight exceeds 26 pounds
- Configured specifically for in-ground pools rather than above-ground setups
- Exact battery capacity and run time are not specified
Good fit if
- You have an in-ground pool and want cordless cleaning.
- You want automatic waterline parking to avoid fishing the cleaner out from the floor.
- You prefer managing pool cleaner retrieval directly from a smartphone app.
Skip if
- You have an above-ground pool.
- You need a lightweight robotic cleaner under 20 pounds.
Verdict: Beatbot AquaSense 2 Cordless Pool Cleaner delivers automated surface parking and app-managed retrieval for in-ground pool maintenance. Its cordless build and SmartDrain feature simplify removal despite a 26.46-pound dry weight.
Beatbot AquaSense 2 Cordless Pool Cleaner
Best for: intensive waterline scrubbing in large pools
- Cleaning Coverage
- Floor, walls and waterline
- Pool Type
- Inground
- Battery Runtime
- Up to 4 hours
- Power Source
- Cordless battery
- Navigation Type
- CleverNav
- Control Method
- App
The Beatbot AquaSense 2 is a cordless robotic cleaner built for in-ground pools up to 3,230 square feet. It features double-pass waterline scrubbing, cleaning the tile line twice on every pass along an N-shaped path. A 10,000mAh battery delivers up to 3.5 hours of wall and waterline cleaning or 4 hours on floors. It suits you if you need dedicated waterline scrub coverage and cable-free wireless dock charging.
Pros
- Scrubs the waterline twice per pass using an N-shaped path
- Up to 4 hours of floor runtime and 3.5 hours on walls and waterline
- Automatic surface parking with water-release SmartDrain
- Cordless dock recharges the 10,000mAh battery in 4 hours
Cons
- Heavy dry weight at 27 pounds
- Recharge takes 4 hours between cleaning cycles
Good fit if
- You have a large pool measuring up to 3,230 square feet.
- You want targeted double-pass scrubbing along your waterline.
- You prefer cordless dock charging without exposed charging ports.
Skip if
- You cannot comfortably lift a 27-pound machine.
- You need a fast recharge turnaround under 4 hours.
Verdict: Beatbot AquaSense 2 Cordless Pool Cleaner delivers dedicated double-pass scrubbing at the waterline with up to 3.5 hours of wall runtime. It provides autonomous coverage and convenient surface retrieval for pools up to 3,230 square feet.
Beatbot Sora 70 Cordless Pool Cleaner
Best for: large pools with shallow tanning ledges
- Cleaning Coverage
- Surface, waterline, floor, walls
- Battery Runtime
- Up to 5 hours
- Suction Power
- 6800 GPH
- Power Source
- 10,000 mAh battery
- Debris Capacity
- 6 L
- Navigation Type
- AI navigation, S-shaped paths
The Beatbot Sora 70 is a cordless robotic pool cleaner designed to cover floors, walls, waterlines, and surfaces. With 6,800 GPH suction and a 10,000 mAh battery, it runs up to five hours on floor mode to handle pools up to 3,200 square feet. It also cleans shallow platforms down to eight inches using dual-jet surface propulsion. You will find it suits large pools that require complete multi-surface maintenance.
Pros
- Up to 5 hours of floor cleaning per charge with a 10,000 mAh battery
- High 6,800 GPH suction rating with a 6L debris container
- Cleans floors, walls, waterline, water surface, and shallow ledges down to 8 inches
- Offers 5 cleaning modes with Bluetooth app control up to 20 meters
Cons
- 150 µm filter mesh is not designed for fine silt or algae
- App remote control requires direct Bluetooth within 20 meters
Good fit if
- You have a large pool up to 3,200 square feet that needs long runtime.
- You want automated cleaning across the floor, walls, waterline, and water surface.
- You have shallow tanning shelves or platforms as low as 8 inches.
Skip if
- You need ultra-fine particle filtration below 150 µm for fine dust.
- You want a physical handheld remote instead of smartphone app control.
Verdict: Beatbot Sora 70 Robotic Pool Cleaner combines 6,800 GPH suction with a 5-hour runtime to deliver full-coverage cleaning from the floor to the surface. It is a capable option if you manage a large pool with shallow ledges.
Beatbot iSkim Ultra Solar Pool Skimmer
Best for: solar surface skimming with voice updates
- Cleaning Coverage
- Surface
- Power Source
- Solar-powered
- Debris Capacity
- 9 liters
- Navigation Type
- Tri-ultrasonic scanning
- Control Method
- Smart app, voice control
- Dimensions
- 17.2 × 10.4 × 17.8 inches
The Beatbot iSkim Ultra is a solar-powered surface pool skimmer with app and voice control. It uses a seven-motor drivetrain, tri-ultrasonic sensors, and a 120 MHz processor to navigate pool surfaces while avoiding obstacles. With a nine-liter debris basket and dual side brushes, it collects surface leaves and floating debris. This model suits you if you want hands-free surface skimming with real-time spoken audio updates on water temperature and battery levels.
Pros
- Voice control support with real-time spoken status updates
- Large 9-liter filter basket with anti-spill lid
- Solar-powered operation with auto-docking and remote app management
- Tri-ultrasonic obstacle avoidance backed by 20 built-in sensors
- Seven-motor drivetrain with dual rotating side brushes
Cons
- Cleans pool surface only, with no floor or wall scrubbing capability
- Relies on solar power for continuous operation
- Measures over 17 inches long and tall, requiring ample storage space
Good fit if
- You want spoken status updates on battery life and water temperature.
- You need a dedicated surface skimmer with a high-capacity 9-liter basket.
- You prefer solar-powered operation managed via mobile app and voice commands.
Skip if
- You need a cleaner that scrubs pool floors, walls, or waterlines.
- You have an indoor or fully shaded pool lacking direct sunlight.
Verdict: Beatbot iSkim Ultra Solar Pool Skimmer delivers voice-guided surface skimming paired with solar charging and a 9-liter waste capacity. It provides autonomous surface debris removal but does not clean pool floors or walls.
Specifications side by side
| Spec | Beatbot Sora 10 Cordless Pool Vacuum | Beatbot Sora Cordless Pool Cleaner | Beatbot iSkim Solar Pool Skimmer | Beatbot Sora 30 Cordless Pool Cleaner | Beatbot AquaSense 2 Cordless Pool Vacuum | Beatbot AquaSense 2 Cordless Pool Cleaner | Beatbot Sora 70 Cordless Pool Cleaner | Beatbot iSkim Ultra Solar Pool Skimmer |
|---|---|---|---|---|---|---|---|---|
| Cleaning Coverage | Floor, walls, waterline, shallow area | Surface, waterline, floor, walls | not specified | Floor, shallow areas, platforms | Floor, walls & waterline | Floor, walls and waterline | Surface, waterline, floor, walls | Surface |
| Pool Type | Above-ground and in-ground | not specified | not specified | Above & in-ground pools | Above & in-ground pools | Inground | not specified | not specified |
| Battery Runtime | Up to 300 minutes | Up to 5 hours | Up to 28 hours | Up to 5 hours | not specified | Up to 4 hours | Up to 5 hours | not specified |
| Suction Power | 6800 GPH | 6,800 GPH | not specified | 6800 GPH | not specified | not specified | 6800 GPH | not specified |
| Power Source | Cordless (7,800mAh battery) | 10,000 mAh battery | 24W solar panel, rechargeable battery | 10,000 mAh battery | Cordless battery | Cordless battery | 10,000 mAh battery | Solar-powered |
| Debris Capacity | 5L | not specified | 9 L | 5 L | not specified | not specified | 6 L | 9 liters |
| Navigation Type | SonicSense ultrasonic sensors | AI navigation | SonicSense dual-ultrasonic | Ultrasonic sensors | Intelligent path optimization | CleverNav | AI navigation, S-shaped paths | Tri-ultrasonic scanning |
| Control Method | Wi-Fi or Bluetooth app | Beatbot app | Smartphone app | Beatbot app | App | App | Smartphone app | Smart app, voice control |
| Special Features | not specified | not specified | not specified | not specified | not specified | Waterline Cleaning | not specified | not specified |
| Ideal For | Above-Ground Pools | not specified | not specified | In-Ground Pools | In-Ground Pools | not specified | not specified | not specified |
| Dimensions | 5.91 × 3.94 × 4.72 inches | 16.9 × 11.2 × 17.1 inches | 5.91 × 3.94 × 4.72 inches | 5.91 × 3.94 × 4.72 inches | 18 × 17 × 9 inches | 18 × 17 × 9 inches | 5.91 × 3.94 × 4.72 inches | 17.2 × 10.4 × 17.8 inches |
| Weight | 18.7 pounds | 22.9 pounds | 17 pounds | not specified | 26.5 pounds | 27 pounds | not specified | not specified |
| Color | Mint | Navy Blue | Navy Blue | Vibrant Orange | Dark Blue | Dark Grey | Lavender Purple | Deep Blue |
| Model | RCMPM031G | Sora 70 | iSkim Navy blue | RCMPM021 | PRCSPE01-NA-A | PRCSDE02G | RCFPM041-NAA-B | iSkim Ultra |
Comparing the Beatbot Pool Cleaner Lineup
The Beatbot lineup divides between submerged cordless vacuums and surface skimmers. If you need floor, wall, or waterline coverage, look to the multi-surface cleaners. The Beatbot Sora 10 delivers 6,800 GPH suction and up to 300 minutes of runtime for pools with shallow ledges. For in-ground basins that require edge scrubbing, the Beatbot AquaSense 2 adds dedicated waterline cleaning.
For floating leaves and top debris, choose a solar skimmer instead. The Beatbot iSkim Solar uses app control and a 9-liter waste capacity to capture floating material before it settles. If you want hands-free alerts, the Beatbot iSkim Ultra adds voice control alongside app management. These solar units suit owners seeking continuous surface clearing rather than bottom scrubbing.
Where Beatbot Fits Pool Maintenance
Beatbot suits you if you manage in-ground or above-ground pools up to 3,230 square feet and want cordless cleaning or autonomous solar skimming. Physical sizes span from compact six-inch profiles up to 18-inch frames, with dry weights ranging from 16.98 to 27 pounds. Maximum runtimes reach five hours.
Key gaps exist across this lineup. You will find no corded units for non-stop electric operation. Surface skimmers do not clean floors or walls, while the submerged vacuums lack solar charging options. Additionally, Beatbot offers no multi-surface vacuum weighing under 18.74 pounds.
If you need to clean floors, see our best steam cleaners with steam.
Choosing Your Beatbot Pool Cleaner
-
Check Pool Type Compatibility
Pool construction determines which robotic cleaner functions properly in your basin. You should check the Ideal For specification before you buy. Some models target above-ground setups, while others are built strictly for in-ground installations. The Beatbot Sora 30, for example, lists compatibility for in-ground pools and handles features like tanning ledges and sun shelves. If you run an above-ground pool, selecting a model rated for that basin type ensures the drive system navigates the base transitions and materials effectively without stalling.
-
Match Cleaning Zones Directly
You need to decide whether your pool requires submerged scrubbing or water surface maintenance. Submerged cleaners scrub floors and climb walls, while dedicated skimmers collect floating leaves before they sink. If your waterline collects stubborn buildup, review the listed cleaning modes carefully. The Beatbot AquaSense 2 with waterline cleaning features double-pass scrubbing designed specifically for waterlines. If your main issue is surface debris rather than algae on pool tiles, a surface-focused skimmer will suit your daily maintenance routine better than a floor-focused vacuum.
-
Select the Power Source
Consider how you want to keep the cleaner running throughout the week. Cordless battery models charge via standard power outlets and provide intensive burst cycles lasting several hours. Solar-powered options draw continuous energy from sunlight while floating on top of the water. The Beatbot iSkim Ultra Solar Pool Skimmer uses solar power to sustain autonomous operation across the surface. Choose a solar model if you want uninterrupted daytime skimming without hauling the device out for plug-in charging after every cleaning cycle.
-
Review Maximum Pool Area
You should always compare your pool dimensions against the cleaner's maximum rated square footage. Cleaners with broad coverage ratings possess the battery endurance and pump volume necessary to finish large cycles. For instance, the Beatbot Sora 70 is rated for pool basins up to 3,200 square feet and delivers a 5-hour runtime. If your pool is expansive, selecting a unit with lower capacity or shorter runtime may leave uncleaned sections. Matching the coverage area ensures complete cleaning without requiring mid-cycle battery recharges.
-
Check Debris Bin Capacity
Check the waste volume specification to see how much material the cleaner collects before needing your attention. Pools surrounded by heavy foliage or trees shed substantial leaves that fill small chambers quickly. The Beatbot iSkim features a 9-liter debris capacity, allowing it to gather large volumes of floating waste without clogging. If you live in an area with sparse debris, smaller internal traps work fine. When heavy yard fall falls into your water, larger collection volume prevents you from having to empty the basket multiple times per day.
-
Consider Weight and Retrieval
Dry weight and water-evacuation features determine how easily you can pull the machine from the pool. Submerged cleaners absorb water weight, making manual lifting strenuous. The Beatbot AquaSense 2 weighs 26.46 pounds dry, but it includes automated surface parking and a SmartDrain feature to simplify removal. If lifting heavy equipment over the pool coping strains you, prioritize models with surface retrieval and rapid water evacuation. Lighter skimmers require less effort to retrieve, while heavier floor units benefit significantly from automated edge-parking technology.
Frequently asked questions
Which Beatbot pool cleaners support mobile app control?
You can control the iSkim, iSkim Ultra, and AquaSense 2 models through an app. The iSkim and iSkim Ultra list app control directly in their specifications, with the Ultra adding voice control. The AquaSense 2 uses app connectivity specifically to manage automated surface retrieval when a cycle ends.
Do Beatbot pool cleaners clean walls and waterlines?
Yes, select Beatbot models clean walls and waterlines. The AquaSense 2 model PRCSDE02G provides dedicated double-pass waterline scrubbing and up to 3.5 hours of wall runtime. Additionally, the Sora 10 handles walls alongside floors and shallow ledges. Surface skimmers like the iSkim do not climb or scrub vertical walls.
How much debris can Beatbot surface skimmers hold?
Beatbot surface skimmers hold up to 9 liters of waste. Both the iSkim and the iSkim Ultra share this 9-liter debris capacity, which gives you ample room for floating leaves and surface particles. Because they collect waste continuously at the surface, they prevent debris from sinking down to the pool floor.
Can you use a Beatbot robotic cleaner in an above-ground pool?
Yes, you can use the Beatbot Sora 10 in above-ground pools. Its specifications list above-ground installations as its ideal pool type. In contrast, models like the Sora 30 and AquaSense 2 are designed specifically for in-ground pools. Always check the designated pool type before selecting a model for your setup.
What suction power do Beatbot cordless vacuum cleaners provide?
Beatbot cordless vacuums in the Sora series deliver a suction rate of 6,800 gallons per hour. The Sora 10, Sora 30, and Sora 70 all share this 6,800 GPH specification. This heavy-duty flow rate allows the units to pull in debris across pool floors, shallow ledges, and slopes.
Which Beatbot model offers voice control capabilities?
The Beatbot iSkim Ultra Solar Pool Skimmer provides voice control. Its specifications list voice control alongside app control, giving you audio updates regarding its skimming operations. Other units in the lineup rely on standard app interfaces or automated cycles rather than verbal feedback for daily surface maintenance.
How long do Beatbot robotic pool cleaner batteries run?
Battery runtimes range from 3.5 hours up to 5 hours on cordless models. The Sora 10, Sora 30, and Sora 70 each offer up to 300 minutes, or 5 hours, of cleaning. The AquaSense 2 PRCSDE02G runs up to 3.5 hours on walls, while solar models operate continuously under sunlight.