BeaMystGear Cordless Dual-Motor Pool Vacuum Review: Specs, Pros and Cons

What stands out

• 120-minute runtime covers up to 850 sq.ft on a single charge
• Dual brushless motors provide focused suction for floor debris like sand and leaves
• Self-parking feature brings the unit to the pool wall when battery is low
• One-touch start and 7.05 lb weight allow for simple, one-handed handling

Who it fits

Key Specs Explained for SP1

Battery Runtime: 120 minutes

This rating indicates the device can clean for two full hours on a single charge. You can cover up to 850 square feet without interruption. This duration suits medium-sized pools where you want to finish the job in one go. Compare this against models with shorter runtimes that may require mid-cycle recharging, which can leave debris behind.

Power Source: Cordless battery

The unit operates without a tethered power cord. You place it in the water and let it work freely. This eliminates the risk of tripping over cables or dealing with tangled wires near the pool edge. It offers greater mobility compared to corded models, allowing you to move it easily between cleaning sessions or storage.

Control Method: One-touch start

You activate the cleaner by pressing a single button. This simple interface reduces the learning curve for new users. It is ideal for families or seniors who prefer minimal setup. Instead of navigating complex menus or remote controls, you press the button and submerge the unit. This straightforward operation ensures quick deployment when you need a clean pool.

Cleaning Coverage: Floor

This device is engineered specifically to clean the bottom surface of your pool. It does not climb walls or navigate steps. This specialization means it focuses its suction power on removing sand, leaves, and stones from the floor. If you need a cleaner that handles vertical surfaces or complex pool shapes, you should look for a multi-surface model instead.

Pool Type: Above-ground, flat-bottom

The SP1 is designed for above-ground pools with flat bottoms and a slope of less than 10 degrees. It works on vinyl, concrete, tile, and fiberglass floors. You must ensure your pool matches these criteria for optimal performance. It is not suitable for in-ground pools with steep slopes or irregular shapes, as it may struggle to maintain traction or suction.

Design and Build Overview

The SP1 unit measures 11 inches wide, 11 inches high, and 6 inches long. This compact rectangular form factor allows it to navigate flat pool floors without getting stuck in tight corners. The listing specifies a black finish on the hydrodynamic body. This shape is engineered to reduce water resistance as the unit moves across the bottom surface.

Weight is listed at 7.05 lbs. This mass allows the vacuum to stay submerged and stable during operation. Despite this weight, the listing notes an ergonomic design that lets you lift and carry the device with one hand. This makes manual retrieval easy when the cycle finishes or if you need to clear debris from the intake.

Controls are minimal, featuring a one-touch start method. You press the button once and submerge the unit. There are no complex interfaces or displays mentioned in the data. The layout focuses on simplicity for busy pool owners. The device is designed for above-ground and flat-bottom pools with slopes under 10 degrees. It is not built for walls or steps. The self-parking feature ensures it stays near the pool wall when the battery is low, making retrieval straightforward with the included hook. According to the listing, this design prioritizes floor cleaning efficiency over complex maneuvering.

Setup And Daily Operation Guide

Setting up the BeaMystGear SP1 requires minimal effort. The unit is cordless, so you do not need to manage power cords or search for outdoor outlets. Simply remove the cleaner from its packaging and ensure the battery is charged. The listing notes a 2.5-hour fast charging time, which allows you to prepare the device quickly before use. Once charged, you press the one-touch start button. There is no complex app pairing or remote control configuration required for basic operation. You then submerge the unit into the water. The SP1 is designed for above-ground pools and flat-bottom in-ground pools with a slope of less than 10 degrees. It works on vinyl, concrete, tile, and fiberglass surfaces. It is not intended for walls or steps. During daily use, the two brushless motors activate to provide focused suction on the pool floor. You do not need to guide the device manually. It navigates the floor autonomously. When the battery level drops, the SP1 uses its self-parking feature to move near the pool wall. This stops the unit from sinking or getting lost in deep water. Retrieval is straightforward. You use the included hook to lift the 7.05 lb unit out of the pool. The hydrodynamic body allows for easy one-handed carrying. The entire process, from start to finish, is designed for simplicity. You press one button, let the motors clean the debris like sand and leaves, and lift it out when the cycle is complete or the battery depletes. This workflow supports regular maintenance without requiring technical expertise or extensive physical effort.

Before You Buy SP1

You should verify your pool’s floor type before buying. The SP1 works only on flat surfaces with a slope under 10 degrees. It handles vinyl, concrete, tile, and fiberglass. Do not expect it to clean walls or steps. Check your pool’s shape to ensure it fits the 11 by 11 by 6 inch footprint. You will need the included hook for retrieval, so keep it safe. Since this unit focuses solely on floor debris, you might need a separate tool for walls if your pool has them. Maintenance is simple. Rinse the filters after each use to keep suction strong. Store the unit indoors during winter to protect the battery. This cleaner sits alongside other robotic options by offering dedicated floor performance. It does not compete with multi-surface models. If you want deep floor cleaning without manual effort, this fits your routine. Pair it with a skimmer net for leaves. This approach keeps your water clear with minimal daily intervention.

Check before you buy

• Verify your pool floor is flat with less than 10-degree slope.
• Confirm your pool surface is vinyl, concrete, tile, or fiberglass.
• Ensure you have a skimmer net for surface leaf removal.
• Check storage space for the 11 by 11 by 6 inch unit.
• Keep the retrieval hook accessible for easy pool wall access.

The product at a glance

1

BeaMystGear Cordless Dual-Motor Pool Vacuum

Best for: small flat-bottom above-ground pools

Cleaning Coverage

Floor

Pool Type

Above-ground, flat-bottom

Battery Runtime

120 minutes

Power Source

Cordless battery

Control Method

One-touch start

Special Features

Self-Parking

View on Amazon: BeaMystGear Cordless Dual-Motor Pool Vacuum Affiliate link

The BeaMystGear SP1 is a cordless robotic pool cleaner designed for above-ground and flat-bottom pools. It features dual brushless motors for focused floor suction and offers a 120-minute runtime on a single charge. Weighing just 7.05 lbs, it includes self-parking technology to locate itself near the pool wall when the battery is low. This model covers up to 850 square feet, making it suitable for smaller residential pools.

Pros

• 120-minute battery runtime covers up to 850 sq.ft
• Dual brushless motors provide powerful floor suction
• Self-parking feature locates unit near pool wall
• Lightweight 7.05 lb design for easy handling

Cons

• Limited to floor cleaning only, not walls or steps
• Requires slope less than 10 degrees
• One-touch control lacks advanced programming

Good fit if

• You have an above-ground or flat-bottom pool
• You want a lightweight unit for easy retrieval
• You need a simple one-touch operation

Skip if

• You have a pool with steep slopes
• You need wall or step cleaning capabilities
• You require a larger cleaning coverage area

Verdict: BeaMystGear SP1 Cordless Pool Vacuum is a practical choice for owners of small, flat-bottom pools who prioritize lightweight portability and extended runtime over multi-surface cleaning.

Specifications side by side

Frequently asked questions

See also

• beamystgear robotic pool cleaner cordless alternatives
• best robot vacuums under 30
• smoture cordless vacuum cleaner review
• inteture cordless vacuum cleaner review