Aiper Scuba V3 Ultra Dual Robotic Pool Cleaner and Skimmer Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Aiper Scuba V3 Ultra Dual is a cordless pool robot that also skims the surface, so one machine covers floor, walls, waterline, steps and the water's surface. It suits owners who want the most complete cleaning Aiper sells and do not want a separate skimmer: two AI cameras plus ultrasonic sensors recognize 20+ debris types, 8,500 GPH dual pumps pull through a 1.1-inch inlet, and a JellyFloat buoyancy engine lifts it to skim and to surface for pickup. Filtration pairs a 180 µm layer with a 3 µm MicroMesh, and it charges wirelessly. These notes summarize Aiper's listing; we have not tested the robot.
What stands out
- Floor, walls, waterline, surface and steps
- Dual AI cameras, 20+ debris types
- 8,500 GPH dual-pump suction
- JellyFloat lift, auto surfacing
- 180 µm + 3 µm filtration
Who it fits
Good fit for
Owners of in-ground pools who want one top-end robot for every surface, including floating leaves, and can lift a heavy unit.
Who should skip it
Skip it if a floor-and-wall robot is enough, if you want a light robot, or if price matters more than surface skimming.
Verdict: Aiper's all-in-one flagship: floor, walls and surface in one robot.
V3 Ultra Dual features
Dual AI cameras
Two cameras plus ultrasonic sensors spot debris and change the path in real time; Aiper claims up to 10x faster cleaning.
Navium mode
One tap starts cleaning chosen from pool conditions, weather and cleaning history.
8,500 GPH, 1.1 in inlet
Dual pumps and a wide 3 cm inlet take leaves and sand in one pass.
JellyFloat lift
Buoyancy control lets it rise, skim the surface and recover from obstacles.
Shallow areas to 7.9 in
Cleans sun shelves and steps down to 20 cm of water.
Weight and charging
The listing gives 28 lb and about 18.7 x 10.9 x 17.3 inches, so it is much heavier than the standard Scuba V3's 18.1 lb. Quick drainage lightens it for lifting, and it charges on a wireless dock.
How a cleaning cycle goes
Start it in Navium mode and let it pick the cleaning plan; it works through 10 adaptive paths for floor, walls, waterline, surface and steps. When done it floats up and waits at the waterline, so you lift it out without a hook, rinse both filter layers and set it on the wireless charger.
V3 Ultra Dual or standard Scuba V3
The standard Aiper Scuba V3 uses a single AI camera, lists up to 240 minutes in Eco mode, parks at the waterline and weighs 18.1 lb, but does not skim the surface. Choose the V3 Ultra Dual if leaves on the water and sun-shelf cleaning matter and you want one robot for both. Choose the standard Scuba V3 if floor and wall cleaning is enough and you want a lighter, cheaper robot.
Check before you buy
- Plan to lift 28 lb
- Floating debris is a regular problem
- Sun shelf or shallow steps
- Spot for the wireless dock
The product at a glance
Aiper Scuba V3 Ultra Dual AI Vision
Best for: All-surface cleaning
- Cleaning Coverage
- Floors, walls, waterline, surface
- Suction Power
- 8,500 GPH
- Navigation Type
- Dual AI cameras, ultrasonic sensors
- Dimensions
- 18.7 × 10.9 × 17.3 inches
- Weight
- 28 pounds
View on Amazon: Aiper Scuba V3 Ultra Dual AI Vision Affiliate link
Aiper Scuba V3 Ultra Dual: cordless robot and skimmer in one, with dual AI cameras, 8,500 GPH dual pumps, a JellyFloat buoyancy lift for surface cleaning and auto retrieval, 10 adaptive paths, 180 µm + 3 µm filtration and wireless charging; cleans shallow areas down to 7.9 inches.
Pros
- Cleans the surface as well
- Dual-camera debris detection
- Ultra-fine 3 µm filter
Cons
- Heavy at 28 lb
- No app named in the listing
- Top-end price
Good fit if
- You want one robot for every surface
- Your pool has a sun shelf
Skip if
- You only need floor and walls
- You want a light robot
Verdict: Aiper's most complete pool robot.
Specifications side by side
| Spec | Aiper Scuba V3 Ultra Dual AI Vision |
|---|---|
| Cleaning Coverage | Floors, walls, waterline, surface |
| Suction Power | 8,500 GPH |
| Navigation Type | Dual AI cameras, ultrasonic sensors |
| Dimensions | 18.7 × 10.9 × 17.3 inches |
| Weight | 28 pounds |
| Color | Gray |
| Model | Scuba V3 Ultra Grey |
Frequently asked questions
Does the Aiper Scuba V3 Ultra Dual skim the surface?
Yes. Its JellyFloat lift lets it rise and clean the water surface as well as floor, walls and waterline.
How much does the Scuba V3 Ultra weigh?
28 lb according to its listing.
What filter does it use?
A 180 µm layer with a 3 µm MicroMesh ultra-fine filter.
Does it need a retrieval hook?
No. It surfaces after cleaning and stays at the waterline until you pick it up.
